Grass Valley K2 Dyno Service Manual - Manual (Page 23)

02 February 2012 K2 Dyno Replay Controller Service Manual 23
* For situations where an ESD garment is used as part of the wrist strap grounding
path, the total system resistance, including the person, garment, and grounding cord,
must be less than 3.5 x 10
7
ohm.
Flooring / Footwear System –
Method 2 (both required) ESD TR53 Flooring Section and
ESD TR53 Footwear Section < 1.0 x 10 9 ohm
Personnel Grounding
Technical Requirement Test Method Required Limits