Grass Valley Intuition XG Installation v.5.0 - Manual (Page 51)

3-12 Intuition XG Installation & Quick Start Guide
Installation instructions for the Intuition XG-3U/Dual
8. Optional: Connect a Time Code Generator to the Time Code card’s BNC
connector on the rear panel of the Intuition XG.
The Time Code Card is a hardware option on the Intuition XG (see
page 1-5 ), which
allows you to lock the Intuition XG’s system clock to an external timecode. The Time
Code card reads Longitudinal Time Code (LTC) from the signal present at the BNC
connector.
9. Optional: Connect the Intuition XG’s GPI card’s connector to an external control
unit that uses GPI to control the Intuition XG.
The GPI Card is a hardware option on the Intuition XG, which allows for control of the
Intuition XG via GPI triggers. The card provides for up to 8 optically isolated GPI inputs
and 8 reed relay GPI outputs (see
page 1-5 ).