Grass Valley Intuition XG Installation v.5.0 User Manual
Page 35
2-6
Intuition XG Installation & Quick Start Guide
Installation instructions for the Intuition XG-e
5.
Repeat steps 2 to 4 for the other inner rail extension.
6.
Each outer rail is in two sections that must be assembled before mounting onto the rack.
a.
Identify the left and right outer rails by examining the ends which bend outward.
b.
Slide the front section of the outer rail into the rear section of the outer rail.
7.
Install the outer rails onto the rack.
a.
Adjust the outer rails to the proper length so that the outer rail fits snugly within the rack.
b.
Align the holes on the front of the outer rail, with the holes on the front of the rack
and secure with the screws provided.
c.
Align the holes on the rear of the outer rail to the holes on the rack and secure with
the screws provided.
d.
Repeat the procedure with the second outer rail assembly.