beautypg.com

Grass Valley Intuition XG Installation v.5.0 User Manual

Page 50

background image

Intuition XG Installation & Quick Start Guide

3-11

Installation instructions for the Intuition XG-3U/Dual

6.

Connect the

Discrete (AES) audio breakout cable

to the Intuition XG’s Discrete

audio connector(s).
Single channel Intuition XG units (XG-3U-e) have one discrete (AES) audio connector
and one breakout cable, while dual channel Intuition XG units (XG-Dual-e) have two
discrete (AES) audio connectors and two breakout cables.
Each discrete audio breakout cable contains 4 BNC inputs and 8 BNC outputs. Each
BNC connector represents 1 stereo pair (2 channels) of digital AES/EBU audio.
Therefore, each discrete audio breakout cable contains 4 stereo pairs (8 channels) of
input and 8 stereo pairs (16 channels) of output.

7.

Optional: Connect the automation system cables to the Intuition XG’s RS-232 or
RS-422 connectors.
The two (2) RS-232 connectors are standard equipment on both models of the
Intuition XG, but the RS-422 card is a hardware option (see

page 1-5

).

The RS-232 and RS-422 connectors provide two control ports upon which the
automation system’s serial cables are connected. It is through this connection that the
automation system communicates and controls the Intuition XG using automation
protocol commands.

SDI OUT B

Second output channel connection for dual channel Intuition XG units
(XG-Dual-e). For the purposes of this setup procedure, connect this
cable to a broadcast monitor.

Not used on single channel Intuition XG units (X-3U-e).

SDI OUT C /K

EY

The matching key signal for SDI OUT A.

SDI OUT D /K

EY

SDI Out B (Fill 2) is the second output channel on the Intuition XG-
Dual-e model. No signal is present at this connection for single-
channel models (XG-3U-e).

ANALOG REF IN

Connect to a house reference (Analog Blackburst or HD Tri-Level) to
synchronize the phase timing video and graphics processing.

ANALOG REF
LOOP OUT

Optional connection. Use to feed a reference signal to another piece
of equipment.

AES IN 1/2
AES IN 3/4
AES IN 5/6
AES IN 7/8
AES OUT 1/2
AES OUT 3/4
AES OUT 5/6
AES OUT 7/8
AES OUT 9/10
AES OUT 11/12
AES OUT 13/14
AES OUT 15/16

This manual is related to the following products: