Grass Valley Intuition XG Installation v.5.0 - Manual (Page 27)

1-8 Intuition XG Installation & Quick Start Guide
Introduction
Overview of the Intuition XG-3U/Dual chassis
The Intuition XG unit is a 3RU rackmount rendering platform that incorporates redundant fans,
three power supplies, and 1 TB RAID1-enabled storage (optional 2 TB RAID10 expansion).
The only visible difference between the 3RU models of the Intuition XG is that the single
channel model (XG-3U-e) has only one (1) discrete AES audio connector, while the dual
channel model (XG-Dual-e) has two (2) discrete AES audio connectors.
In some cases, the positioning of the connectors on the Intuition XG’s rear panel differs
depending upon the hardware options installed. See
page 1-6 for a list of the Intuition XG’s
hardware options.
The following table summarizes the Intuition XG’s physical dimensions and power consumption:
Consult the following sections to familiarize yourself with the Intuition XG’s front and rear
panel components:
•
“Front panel components (Intuition XG-3U/Dual)” on page 1-9
• “Rear panel components (Intuition XG-3U/Dual)” on page 1-10
Chassis F ORM : 3U rackmount chassis
H EIGHT : 5.2” (132 mm)
W IDTH : 17.7” (450 mm)
D EPTH : 25.5” (648 mm)
Power consumption AC input: 100 - 240V, 50 - 60 Hz
Consumption: 4.05 - 1.73A
Power: 410 max.
Temperature Ambient temperature: 35 C
Note: This shall be the maximum internal
temperature within the rack in which the
Vertigo XG unit is installed.
°