Grass Valley Aurora Browse v.6.5 Installation - Manual (Page 84)

84 Aurora Browse Installation and Configuration Guide November 1, 2008
Chapter 3 Configuring the system
For this configuration stage you configure your archive MDI, high-res storage, and
the MediaFrame server to work together. This assumes that the archive devices are
already installed and connected.
The portion of the system configured and tested in this stage is illustrated by the
following diagram.
To support archive functionality on the News/K2 system, you must install a unique
Aurora FTP on a platform somewhere in the system.
To configure and test the Archive stage, do the following:
1. “Add archive MDI” on page 85
2. “Verify archive preparations” on page 86
3. “The K2 storage or AuroraShare NAS system” on page 89
4. Configure your archive:
a. “Configure Avalon MDI” on page 90
b. “Configure DIVA MDI” on page 91
c. “Configure FlashNet MDI” on page 92
d. “Checklist: Archive stage” on page 93
5. “Checklist: Archive stage” on page 93
Archive stage
MediaFrame Server MDI Server Aurora FTP Server
Archive Media
Storage
(e.g., K2)
!
Client/FTP LAN (Production Network)