Grass Valley Aurora Browse v.6.5 Installation - Manual (Page 75)

November 1, 2008 Aurora Browse Installation and Configuration Guide 75
Checklist: Encoder stand-alone stage
d. Click OK to exit the Add GXF Server dialog box.
9. In the Advanced Settings section, you can adjust the Audio Gain Level to calibrate
Aurora Edit LD audio, or to improve the quality of the desktop audio (e.g. if the
source is 'too hot').
10.In the MediaFrame Config tool, click Apply .
11.Press the Validate button to test the status of the current configurations. If the
configurations are valid, click OK to exit the MediaFrame Config tool.
Checklist: Encoder stand-alone stage
Use the following check list to verify that the basic configuration and testing of the
stand-alone encoder is complete.
Encoder is connected to NAS
Encoder writes to NAS
MPEG created
MPEG playback with audio
Storyboard files are created.
3. If the high-res stream for which the encoder is creating proxy material is interrupted, the encoder waits this long for
the stream to continue.