Grass Valley Aurora Browse v.6.5 Installation - Manual (Page 31)

November 1, 2008 Aurora Browse Installation and Configuration Guide 31
Chapter
3
Configuring the system
You can use the topics in this chapter in the following ways:
• Initial configuration — After your system components are rack mounted, cabled,
and the physical installation process is complete, continue with the configuration
instructions in this chapter to create a working system. You can follow the
Basic
path or the Advanced path through the core configuration stages, as explained
“Configuration overview - K2 storage” on page 32 .
• Customizing — After the system is functioning, you can go back to the
configuration pages and modify the settings to customize the system to fit any
special workflow requirements.
The topics in this chapter include the following:
• “Configuration overview - K2 storage” on page 32
• “Establish conventions” on page 33
• “Configure network - K2 Storage” on page 37
• “Prepare for core configuration stages” on page 40
• “Stop services” on page 49
• “MediaFrame stage” on page 50
• “Encoder stand-alone stage” on page 68
• “Encoder + Server stage” on page 76
• “Archive stage” on page 84
• “Deploy remaining machines for full system” on page 94
• “Test system level interactions” on page 94
• “Add Aurora Browse Clients” on page 95
• “Managing Aurora Browse User sessions” on page 98
• “Adding custom fields and metadata mapping” on page 99