Grass Valley Aurora Browse v.6.5 Installation - Manual (Page 76)

76 Aurora Browse Installation and Configuration Guide November 1, 2008
Chapter 3 Configuring the system
For this configuration stage you configure the MediaFrame server to work together
with the Encoder and NAS from the Encoder stand-alone stage. MDI services are also
required, as configured in the MediaFrame stage.
The portion of the system configured and tested in this stage is illustrated by the
following diagram.
Refer to “System diagram - K2 storage” on page 12 for a view of the entire system.
To do the basic configuration and testing of the encoder plus server, do the following:
1. “Configure Media Frame Core ASK: Encoder” on page 76
2. “Configure Rules Automation: Encoder” on page 77
3. “Test: Encoder + Server stage - high-res source” on page 81
Configure Media Frame Core ASK: Encoder
Make sure the encoder’s proxy transfer service is registered with the ASK software
component with a logical name, as explained in
“Configure Media Frame ASK:
Register components” on page 51 . If ASK is down, you need to manually enter the
names, and they must match exactly. Therefore, where possible, use the drop-down
list to ensure the exact name.
Encoder + Server stage
info
MediaFrame Server
mpg
Client/FTP LAN
MDI Server
th/sb
Proxy
NAS
Encoder
th/sb mpg
info
Ingest
Media
Server
info info
AV
AV
Aurora Ingest
!