Grass Valley Aurora Browse v.6.5 Installation - Manual (Page 68)

68 Aurora Browse Installation and Configuration Guide November 1, 2008
Chapter 3 Configuring the system
For this configuration stage you configure and test one encoder and one proxy NAS
to work together. The encoder creates storyboard and MPEG proxy. There are two
types of encoder: SmartBin and Aurora Proxy. Configuration pages and procedures
are the same for HD and SD encoders.
The portion of the system configured and tested in this stage is illustrated by the
following diagram.
Refer to “System diagram - K2 storage” on page 12 for a view of the entire system.
To do the basic configuration and testing of a stand-alone encoder, do the following:
1. Configure the encoder:
• “Configure SmartBin Encoder” on page 69
or
• “Configure Aurora Proxy Encoder” on page 73
2. “Checklist: Encoder stand-alone stage” on page 75
Encoder stand-alone stage
mpg
Aurora Proxy
Encoder
Client/FTP LAN
th/sb
th/sb
Proxy
NAS
mpg