Grass Valley Aurora Browse v.6.5 Installation - Manual (Page 64)

64 Aurora Browse Installation and Configuration Guide November 1, 2008
Chapter 3 Configuring the system
Configure Profile MDI
This page configures the Managed Device Interface (MDI) for a stand-alone Profile
system.
Multiple Profile MDIs run on a single machine (the MDI Server), but they each need
their own process port number. For this purpose, enter incrementing numbers in the
“Port” field. The MDIs and their port numbers must match settings as in
“Configure
Media Frame ASK: Register components” on page 51 .
To make the configurations easier to read for troubleshooting purposes, add MDIs
sequentially so there is a correlation between the port number and any number in the
MDI name.
1. Locally on the MDI server, select Programs| Grass Valley | MediaFrame Config .
Select the MDI Configuration tab.
2. Enter the name of the MediaFrame server. Do not modify Port 9010. See “Ports and
services mapping” on page 36 .
3. Select the Profile MDI tab.
4. Under Registered Profile, click Add.
5. Enter the MDI name or click ... to browse for the Profile MDI.
6. Enter the port number 9130.
7. Enter the primary and secondary profile names.