Grass Valley 8964ENC v.1.2.2 - Manual (Page 57)

8964ENC/-FS — Instruction Manual 57
Configuration
OSD Control Web Page
Use
this
link
The OSD Control web page ( Figure 30 ) allows enabling and disabling of the
OSD image on any of the four channel outputs. It also displays the status
of the onboard OSD jumper, JP3 (see
8964ENC Module Onboard Configura-
tion Settings on page 30 ). Jumper JP3 on the module enables control of the
OSD by either the local onboard controls or this OSD Control web page.
Once the OSD control is enabled, it can be turned on and off for each
channel with the controls in this display or with the local onboard controls.
After module configuration, set the jumper to disable the OSD and prevent
it from being put on-air inadvertently.
Figure 30. 8964ENC OSD Control Web Page