Noise reducer web page – Grass Valley 8964ENC v.1.2.2 User Manual
Page 51
8964ENC/-FS — Instruction Manual
51
Configuration
Noise Reducer Web Page
Use
this
link
The Noise Reducer function (
) can be enabled to adjust picture
detail or can be bypassed or disabled for each channel.
Select the channel to be adjusted from the
Channel 1 – 4
buttons. Set the fol-
lowing adjustments with this web page:
•
Check the
Enable Noise Reducer
checkbox to turn on noise reduction.
•
Select the type of noise filter from the
Filter Select
radio buttons.
•
Use the Level control to adjust the amount of noise reduction on the
channel output.
•
Adjust the Threshold control for whatever signal amplitude the Noise
Reducer will work on. The higher the threshold number the more noise
is reduced but more video distortion will occur.
Figure 24. 8964ENC Noise Reducer Web Page