Grass Valley 8964ENC v.1.2.2 - Manual (Page 45)

8964ENC/-FS — Instruction Manual 45
Configuration
When the Frame Sync option is enabled (8964ENC-FS), the Timing page
(
Figure 19 ) will also include a Vertical timing adjustment and Freeze con-
trols.
Select the channel to be adjusted from the Channel 1 – 4 buttons and adjust
the following Frame Sync timing controls:
• Horizontal Timing (in pixels)
• Fine Phase (in percent relative to input sync)
• Vertical Timing (in lines)
Select one of the following buttons from Freeze Mode:
• AutoFrz – auto freeze to last valid field will occur upon loss of signal.
• AutoBlue – auto freeze to blue screen will occur upon loss of signal.
• Field 1 , Field 2 , or Frame – selecting one of these buttons performs an
immediate manual freeze on the selected channel output.
Figure 19. 8964ENC-FS Timing With Frame Sync and Freeze Controls