Grass Valley 8964ENC v.1.2.2 - Manual (Page 53)

8964ENC/-FS — Instruction Manual 53
Configuration
E-MEM Web Page
Use
this
link
The E-MEM web page provides local operations for learning and recalling
configurations into E-MEM registers. File operations are also available for
saving or loading the learned E-MEM files to and from a hard disk or other
accessible media.
Factory default settings for all channels can be recalled by selecting the
Recall factory settings button. To return the module to the factory signal names
(such as the signal inputs), select the Recall factory names button.
There are two E-MEM view selections: Standard and Advanced .
In Standard view ( Figure 26 ), any one of five learned E-MEMs can be
recalled by selecting the corresponding Recall button in the Local Opera-
tions window. This will place the configuration for all four channels
learned into that E-MEM into the 8964ENC. This change will occur imme-
diately upon recall. The name of the last recalled E-MEM will appear in the
top header of each web page for the module.
To learn an E-MEM select the Advanced button in the View Selection section.
This will open the Advanced view ( Figure 27 on page 54 ).
Figure 26. 8964ENC E-MEM Web Page (Standard View)