Grass Valley 8960ENC v.8.1.0 - Manual (Page 49)

8960ENC—Instruction Manual 49
Specifications
Serial Digital Outputs
Number of outputs 2
Signal type Serial digital video conforming to SMPTE259M 10bit 4:2:2component
digital signal
Signal Level 800 mV +/-10%
Connector type 75 Ω on 8900 frame
Output Return Loss > 15 dB up to 270 MHz
Jitter Conforms to SMPTE 17.2/002
Rise/Fall Times 400-700 ps (20-80% amplitude)
Reference Input
Number of references 2
Signal type Black Burst
Separate input assigned for SMPTE170M signal (525) and
CCIR624 signal (625)
Signal level Sync: 300 mV p-p ±3 dB
Input impedance 75
Ω or high impedance, jumper selectable
Connector type 75 Ω on 8900 frame
Return loss > 36 dB to 5 MHz
RMS signal-to-noise > 40 dB to 5 MHz
SCH error ≤ 60 degrees
Color-frame locking Composite analog video output and reference signal must be within ±10
video lines phase difference or color-frame lock will be in free-run mode
Environmental
Frame temperature range See Gecko Frame manual
Operating Humidity Range 0 to 90% non-condensing
Non-operating Temperature -10 to +70 degrees C
Mechanical
Frame type 8900 Gecko Video or GeckoFlex with 8900V-R rear module
Power Requirements
Supply voltage + 12V
Power Consumption < 6.5 Watts, < 8.5 Watts with Frame Sync option
a Grass Valley no longer supports PAL-M in any of its modular products. Although this setting may work in certain appli-
cations, Grass Valley will not warrant that it works or provide support if problems are encountered using this product with
PAL-M signals. This product has not been modified to eliminate support for PAL-M. If this product has been used with
PAL-M in the past without problems, there shouldn’t be any issues using it for the same application. However, it is not rec-
ommended that customers use it in any new PAL-M applications.
Table 6. 8960ENC Specifications - (continued)
Parameter Value