Grass Valley 8960ENC v.8.1.0 - Manual (Page 24)

24 8960ENC—Instruction Manual
Configuration
Table 5. Encoder Configuration Functions
Function
Switch
Paddle
Switch Up
Paddle
Switch Down
Function Description
Ban
k 1
- 2nd LED Off
Input/Output Signal Adjustments
0 Auto Manual
Standard Recognition – Automatic standard recognition or manual
select enable.
1 525 625
Manual Standard – Selection of 525-line or 625-line signal. The
internal automatic standard detection is disabled when Manual is
selected.
2 On Off
Setup in the output video (this function is disabled if the standard is
625). Select On for NTSC, select Off for Japanese NTSC.
3 NTSC PAL-M a 525 NTSC/PAL-M Selection – Defines the subcarrier frequency of
the output video signal (Function is Disabled if standard is 625).
4 Increase Decrease
Output Video Level – controls ± 6 dB gain adjustment of the output
video signal in 256 steps.
Signal Processing Adjustments
5 Enable Calibrated
User Adjustments – Enables processing amplifier functions (6-9) or
selects Calibrated presets optimized for a calibrated video output.
6 Increase Decrease Luma Level b – Can be adjusted ±10% in 256 incremental steps.
7 Increase Decrease Black Level 2 – Can be adjusted ±100 mV in 256 incremental steps.
8 Increase Decrease Chroma Level
2
– Can be adjusted ±10% in 256 incremental steps.
9 Increase Decrease
Hue 2 – Chroma phase can be rotated from 0 to 360 degrees. Dis-
abled if standard is PAL.
Signal Filtering Setup
A Enable Disable Enable/Disable modulated chroma signal
B Enable Disable Enable/Disable burst reference in the output signal
C Pass Delete
VI Processing Options – Select Pass for picture content processed
and passed through, or Delete to remove picture content.
D On Off Adds or removes setup for line 21 in both fields
E On Off Adds or removes setup for line 22 in both fields
F – Recall
Factory Default – Resets all user adjustable parameters to optimized
setting for a calibrated SDI input signal.