Grass Valley 8960ENC v.8.1.0 - Manual (Page 33)

8960ENC—Instruction Manual 33
Configuration
• Adjust the Output Video Level using either the Slider or Numeric adjust-
ment mode (see Figure 13 on page 31 for numeric control and Figure 15
for slider control).
The gain of the output video is adjusted relative to a calibrated value of
1 V p-p (100%). For example, if you have an output of 1V p-p, the value
would be set to 100%.
In either adjustment mode, the single arrow will increment the value by
approximately 0.5% per click. The double arrows increment or decre-
ment the value by approximately 10x (5% per click).
Note Numeric displays are for approximate values only. Calculation of displayed
values are subject to decimal place truncation. Variation from the absolute
value increases at higher adjustment levels.
Figure 15. Output Level Adjustments – Slider Control Type