Grass Valley 8960ENC v.8.1.0 - Manual (Page 29)

8960ENC—Instruction Manual 29
Configuration
8960ENC Links and Web Pages
The 8900 web interface GUI provides the following links and web pages for
the 8960ENC module (
Figure 11 ):
• Status – reports input and reference signal status and module informa-
tion (
page 30 ),
• Standard Selection – provides controls for setting module line standard
and setting output video levels (
page 31 ),
• Levels – provides access to controls for adjusting luma, chroma, hue,
and black levels (
page 34 ),
• Timing – provides lock source and fine phase adjustments and hori-
zontal and vertical timing adjustments when the 8900FSS is installed
(
page 37 ),
• Video Processing – provides controls for enabling and disabling video
functions on the encoded output (
page 40 ),
• Recall Factory Defaults – use this web page to recall factory defaults for
the module (
page 41 ), and
• Slot Config – provides a Locate Module function, Slot Identification
fields, Slot Memory controls, and links to the Frame Alarm and SNMP
Trap enables on the 8900NET module web pages (
page 42 ).
Figure 11. 8960ENC Web Page Links
On all web pages, click on Apply to activate settings in each selection then
refresh the web page at the top of the page with the Refresh button (both
shown at left).
Refer to Table 4 on page 20 for a complete summary of controls, defaults,
and parameter ranges.