Grass Valley 8960ENC v.8.1.0 - Manual (Page 19)

8960ENC—Instruction Manual 19
Configuration
Configuration
The 8960ENC can be configured locally using onboard switches or
remotely using the 8900NET network interface GUI or a networked control
panel.
Refer to the following sections for configuration instructions:
• Configuration Summary ( page 19 )
• Local Onboard Module Configuration ( page 22 )
• Remote Control and Monitoring ( page 26 )
Operation of these control types is explained in detail in their respective
sections of this manual.
Configuration Summary
The configuration of the 8960ENC establishes:
• Reference signal input impedance (jumper selection),
• Local only or Remote/Local control (jumper selection),
• Input/Output standard setup,
• Signal processing adjustment,
• Signal filtering setup, and
• Optional Frame Sync module setup.
Output standard setup provides multi-standard support of analog output
signals such as NTSC, Japanese NTSC, PAL-B, PAL-M.
The factory (default) settings for signal processing functions are set to pass
a calibrated broadcast quality signal at optimum levels. Signal processing
amplifier adjustments are available to correct deficiencies in the input
signal.
Table 4 on page 20 provides a summary in table format of all parameters
and their ranges, default values, and remote, local, and control panel func-
tion names and locations for setting each value.