Grass Valley 8960ENC v.8.1.0 - Manual (Page 31)

8960ENC—Instruction Manual 31
Configuration
Standard Selection Web Page
The Standard Selections web page provides controls to set the line stan-
dard, enable setup on the vertical interval and the output video, and set the
video output level from the module.
Set the following parameters on this web page:
• Set the Standard Recognition control to either Auto or Manual . Auto mode
allows the module to detect and accept either a 525-line or 625-line
input signal. The line standard value will be reported as a read-only
value in the menu when
Auto is selected (see Figure 13 ).
Figure 13. Standard Selection Web Page
Use
this
link