Grass Valley 8960ENC v.8.1.0 - Manual (Page 34)

34 8960ENC—Instruction Manual
Configuration
Levels Web Page
The Levels web page provides access to processing amplifier controls. You
may select user adjustable to set the values or set the module to factory cal-
ibrated levels.
Set the User Adjustments pulldown to either Calibrate or User .
In Calibrate mode, the module selects preset factory default values opti-
mized for a calibrated video output. The values will be reported as
read-only as shown in
Figure 16 .
Figure 16. Levels Web Page – Calibrate Mode
In User mode, select Slider or Numeric adjustment mode to adjust the fol-
lowing output video parameters (see Figure 17 on page 35 for numeric con-
trols and Figure 18 on page 36 for slider controls):
• Luma level (luminance gain relative % white),
• Chroma level (chrominance gain relative % saturation),
• Hue, 0 – 360 degrees (525 standard only), and
• Black level (black level relative to % white).
In either adjustment mode, the single arrow will increment/decrement the
values by approximately 1x the parameter value. The double arrows will
increment/decrement the values by approximately 10x. In
Numeric adjust-
ment mode, you may also enter a value directly into the window.
Use
this
link