Figure 26 – H3C Technologies H3C Intelligent Management Center User Manual
Page 66

56
Figure 26 IPsec VPN tunnel information
IPsec VPN tunnel information:
•
Link Name—Tunnel name.
•
Hub Device—Hub device name.
•
Hub Interface—Interface on the hub device that is bound to the IPsec policy.
•
Hub IP—IP address of the hub interface that is bound to the IPsec policy.
•
Spoke Device—Spoke device name.
•
Spoke Interface—Interface on the spoke device that is bound to the IPsec policy.
•
Spoke IP—IP address of the spoke interface that is bound to the IPsec policy.
•
Tunnel Type—Tunnel type, IPsec VPN.
•
Config Status—Whether or not the tunnel configuration is complete.
•
Status—Whether or not the tunnel is deployed.
•
IPsec Tunnel Receive Rate—Average receive rate (in bps) of the IPsec tunnel within every 5 minutes
during the last polling interval.
•
IPsec Tunnel Transmit Rate—Average transmit rate (in bps) of the IPsec tunnel within every 5 minutes
during the last polling interval.
•
IPsec Tunnel Inbound Drop Rate—Average packet drop rate within every 5 minutes in the inbound
direction of the IPsec tunnel during the last polling interval.
•
IPsec Tunnel Outbound Drop Rate—Average packet drop rate within every 5 minutes in the
outbound direction of the IPsec tunnel during the last polling interval.
•
IKE Tunnel Inbound Dropped Packets—Number of packets dropped within every 5 minutes in the
inbound direction of the IKE tunnel during the last polling interval.
•
IKE Tunnel Outbound Dropped Packets—Number of packets dropped within every 5 minutes in the
outbound direction of the IKE tunnel during the last polling interval.