Modifying monitor settings – H3C Technologies H3C Intelligent Management Center User Manual
Page 57
47
Modifying monitor settings
1.
Click the Service tab.
2.
From the navigation tree, select IPsec VPN Manager > Options.
3.
Click the Monitor Settings tab.
The tab displays an IPsec Tunnel Statistics area and an IKE Tunnel Statistics area.
IPsec Tunnel Statistics area
{
Receive Rate (bps)—Monitor the average receive rate (in bps) of an IPsec tunnel within every 5
minutes. The option is selected by default and cannot be cancelled.
{
Transmit Rate (bps)—Monitor the average transmit rate (in bps) of an IPsec tunnel within every
5 minutes. The option is selected by default and cannot be cancelled.
{
Inbound Drop Rate (%)—Monitor the packet drop rate in the inbound direction of the IPsec
tunnel. The option is selected by default and cannot be cancelled.
{
Outbound Drop Rate (%)—Monitor the packet drop rate in the outbound direction of the IPsec
tunnel. The option is selected by default and cannot be cancelled.
{
Receive Rate (pps)—Select this option to monitor the average number of received packets of an
IPsec tunnel within every 5 minutes.
{
Transmit Rate (pps)—Select this option to monitor the average number of transmitted packets of
an IPsec tunnel within every 5 minutes.
{
Number of Dropped Inbound Packets—Select this option to monitor the number of dropped
packets in the inbound direction of the IPsec tunnel within every 5 minutes.
{
Number of Dropped Outbound Packets—Select this option to monitor the number of dropped
packets in the outbound direction of the IPsec tunnel within every 5 minutes.
IKE Tunnel Statistics area
{
Number of Discarded Input Packets—Monitor the number of dropped packets in the inbound
direction of the IKE tunnel within every 5 minutes. The option is selected by default and cannot
be cancelled.
{
Number of Discarded Output Packets—Monitor the number of dropped packets in the
outbound direction of the IKE tunnel within every 5 minutes. The option is selected by default
and cannot be cancelled.
{
Receive Rate (bps)—Select this option to monitor the average receive rate (in bps) of an IKE
tunnel within every 5 minutes.
{
Transmit Rate (bps)—Select this option to monitor the average transmit rate (in bps) of an IKE
tunnel within every 5 minutes.
{
Receive Rate (pps)—Select this option to monitor the average number of received packets (in
pps) of an IKE tunnel within every 5 minutes.
{
Transmit Rate (pps)—Select this option to monitor the average number of transmitted packets (in
pps) of an IPsec tunnel within every 5 minutes.
4.
Click OK.
After the configuration is complete, IVM starts using the settings to monitor devices and generate
monitor graphs. For more information about monitor graphs, see "
."