H3C Technologies H3C SecBlade SSL VPN Cards - Manual (Page 71)

63
Item Action
AD Server Address List
Required
Specify the AD server address list, which can contain multiple addresses,
separated with semicolons (;).
Administrator’s Account
Required
Specify the administrator’s account to be bound to the AD server, namely, the
administrator's CN.
Password
Required
Password of the administrator’s account.
Confirm Password
Required
Type the password again.
Username format
Required
Specify the format of the username for logging into the AD server, that is,
whether to exclude the AD domain name from the username.
Authentication Method
Optional
Specify the certificate policy for users using the AD authentication method.
Enable Authentication
Optional
Select to enable AD authentication.
Server failure restoring time
Required
Specify the waiting time before restarting the AD service after it fails
NOTE:
For Administrator’s Account, you can type the default administrator account administrator of the AD
domain, or type any account in the user group users.
Configuring the Combination Authentication Policy
Overview
An combination authentication policy can combine any two of the four authentication policies (local
authentication, RADIUS authentication, LDAP authentication, AD authentication) in any order. You can
specify whether a user needs to input the password for the second authentication after the user passes the
first authentication.
Configuration Procedure
Select the Combination Authentication tab to enter the combination authentication policy configuration
page shown in Figure 48 .