H3C Technologies H3C SecBlade SSL VPN Cards - Manual (Page 45)

37
Table 8 Global configuration items:
Item Action
Start IP
Required
Specify the start IP address of the network segment that can be assigned to
the client’s virtual network card.
End IP
Required
Specify the end IP address of the network segment that can be assigned to
the client’s virtual network card.
Subnet Mask
Required
Specify the subnet mask of the virtual network cards’ IP address.
Gateway IP
Required
IP address of the virtual gateway.
Heartbeat Interval
Required
Set the interval for sending heartbeat packets to the gateway. Failing to
send a heartbeat packet indicates that the network is disconnected. The
interval defaults to 60 seconds.
Client Reachable
Required
Enable/disable the communication between different clients.
WINS Address
Optional
Type the WINS server address of the internal server cluster for domain
name resolution.
DNS Address
Optional
Type the DNS server address for domain name resolution.
Access VPN Only
Optional
After enabling the IP network access service, select this checkbox to allow
users to access the VPN only.
User Page's Network Segments
Display Type
Optional
Display the user network service as description information or an IP
address.
Configuring Host Resources
Overview
Configure the host resources for users to access.
Configurations Tasks
Select the Host Configuration tab in the page shown in Figure 29 to enter the host configuration page
shown in Figure 30 .