H3C Technologies H3C SecBlade SSL VPN Cards - Manual (Page 67)

59
Item Action
Primary Server Quiet Interval
Required
Specify the waiting time before switching back from the secondary server to
the primary server when the primary server comes back into service.
User Group RADIUS Attribute
Read only.
User group RADIUS attribute, which is 140 currently.
Enable Authentication
Optional
Specify whether to enable RADIUS authentication.
Authentication Method
Optional
Select the certificate policy for users using the RADIUS authentication
method.
Authentication Port
Required
Specify the authentication port of the primary RADIUS server.
Secondary Server Auth. Port Specify the authentication port of the secondary RADIUS server.
Primary Authentication Server
Status Optional
Specify the status of the primary authentication server, active or block.
Secondary Authentication
Server Status
Optional
Specify the status of the secondary authentication server, active or block.
Enable Accounting
Optional
Specify whether to enable RADIUS accounting.
Upload Virtual IP
Optional
Specify to upload the assigned virtual NIC address after RADIUS
accounting succeeds.
Accounting Port
Required
Specify the accounting port of the primary RADIUS server.
Secondary Server Acct. Port
Optional
Specify the accounting port of the secondary RADIUS server.
Realtime-Accounting Interval
Required
Specify the interval at which the device sends accounting update packets to
the RADIUS server.
Realtime-Accounting Packet
Retransmission Times
Required
Specify the retransmission times the device can try if the device fails to send
an accounting update packet to the RADIUS server.
Enable Stop-Accounting Buffer
Required
Select to enable the stop-accounting packet buffering function. With this
function enabled, if the device fails to send a stop-accounting packet, it will
buffer the packet and then retransmit the packet.
Stop-Accounting Packet
Retransmission Times
Required
After Enable Stop-Accounting Buffer is selected, set the retransmission times
the device can try if the device fails to send a stop-accounting packet to the
RADIUS server.