H3C Technologies H3C SecBlade SSL VPN Cards - Manual (Page 32)

24
Figure 18 Create a remote access service resource
Table 2 Remote access service resource configuration items:
Item Action
Resource Name
Required
Specify a unique name for the remote access service resource.
Remote Host
Required
Specify the name or IP address of the remote host.
Remote Port
Required
Specify the remote port number on the remote host. It defaults to 23.
Local Host
Required
Specify the listening IP address of the local host such as a loopback
address or a random character string.
Local Port
Required
Specify the local port number on the local host. It defaults to 23. A port
number greater than 1024 is recommended.
Command Line
Optional
Configure a command line for the resource. Then, a normal user can click
the resource link to launch the corresponding application and access the
remote server. Format: telnet character string of the local host. If the
default local port is used, you do not need to provide the local port
information in the command line.