H3C Technologies H3C SecBlade SSL VPN Cards - Manual (Page 35)

27
Item Action
Remote Port
Required
Remote port number on the remote host. The default port number is 3389 for
Windows desktop sharing.
Local Host
Required
Specify the address of the local host, such as a loopback address or a random
character string.
Local Port
Required
Local port number on the local host. The default port number is 3389 for
Windows desktop sharing.
Command Line
Optional
Configure a command line for the resource. Then, a normal user can click the
resource link to launch the corresponding application and access the remote
host.
Format: mstsc -v character string of the local host
NOTE:
If you configure the local port as 3389 for desktop sharing after starting remote desktop, the port binding
may fail when a user logs in. In that case, you only need to configure a port number other than that of the
remote desktop as the local port number. For example, if the local port number is 6500 and the local host
name is remote_desktop, you need to type mstsc -v remote_desktop:6500 in the command line.
Modifying a Desktop Sharing Resource
Select a resource and click Configure in the page shown in Figure 19 to modify the desktop sharing
resource. For information about the configuration items, see Table 3 .
Configuring Remote Desktop Web Access
Resources
Overview
Remote desktop web access has the same function as desktop sharing. It allows the user to use a local
host to access sessions on a remote host. Desktop sharing is based on IP addresses, and remote desktop
web access is based on web.
Configuration tasks
Click the Remote Desktop Web Access tab in the page shown in Figure 19 to enter the page shown
in Figure 21 .