Configuration procedure – H3C Technologies H3C SecPath F1000-E User Manual
Page 145
4
Figure 5 Smooth upgrading using the TFTP client function
Configuration procedure
Step1
Configure the PC (TFTP Server), the configuration procedure is omitted.
•
On the PC, enable the TFTP server
•
Configure a TFTP working directory
Step2
Configure Device (TFTP Client)
CAUTION:
If the available memory space of the device is not enough, use the fixdisk command to clear the memory
or use the delete /unreserved
file-url command to delete the files not in use and then perform the following
operations.
# Enter system view.
# Download application file newest.app from PC.
# Upload a configuration file config.cfg to the TFTP server.
# Specify newest.app as the main startup file to be used at the next startup.
# Reboot the device and the software is upgraded.
CAUTION:
The startup file used for the next startup must be saved under the root directory of the storage medium. You
can copy or move a file to the root directory of the storage medium. For the details of the boot-loader
command, refer to
Device Management Commands in the System Volume.