Rear panel, Own in, Figure – H3C Technologies H3C WX5000 Series Access Controllers User Manual
Page 8
1-2
Figure 1-2
Front panel of the WX5002V2
(1) Gigabit Ethernet interface 2—SFP optical interface
(2) 1000 Mbps LED of gigabit Ethernet interface 2
(3) 10/100 Mbps LED of gigabit Ethernet interface 2
(4) 10/100/1000 Base-T auto-sensing Ethernet electrical interface 2
(5) Gigabit Ethernet interface 1—SFP optical interface
(6) 1000 Mbps LED of gigabit Ethernet interface 1
(7) 10/100 Mbps LED of gigabit Ethernet interface 1
(8) 10/100/1000 Base-T auto-sensing Ethernet electrical interface 1
(9) Console port
(10) System LED
(11) LED of the expansion card
(12) LED of power supply 1
(13) LED of power supply 2
Rear Panel
The WX5002V2 provides two power supply module slots and one expansion card slot, as shown in
.
Figure 1-3
Rear panel of the WX5002V2
(1) PSU 1 (AC/DC)
(2) Handle of PSU 1
(3) OPEN BOOK sign
(4) Power cord retainer for PSU 1
(5) AC power socket of PSU 1
(6) PSU 2 (AC/DC)
(7) Handle of PSU 2
(8) OPEN BOOK sign
(9) Power cord retainer for PSU 2
(10) AC power socket of PSU 2
(11) Expansion card slot
(12) OPEN BOOK sign
(13) Grounding screw
OPEN BOOK and CAUTION signs: Refer to related sections when performing the following operations:
Table 1-1
OPEN BOOK sign description
Operation
Related section
Connect the power cord
Ground the device