H3C Technologies H3C WX5000 Series Access Controllers - Manual (Page 7)

1-1
1
Access Controller Overview
Introduction
The H3C WX5002V2 Access Controller is a new-generation wireless access controller product
developed by Hangzhou H3C Technologies Co., Ltd. (referred to as H3C hereinafter). The WX5002V2
provides two groups of Combo ports. Besides, the WX5002V2 also provides an expansion slot, where
you can insert a card of a different type as needed in the future. This provides not only strong
processing capability but also flexible system configuration schemes. In terms of reliability, the
WX5002V2 uses pluggable power supply units (PSU). Thus, you can choose to use double PSUs for
high reliability or use a single PSU for economical sake.
Appearance
Figure 1-1 shows the appearance of the WX5002V2.
Figure 1-1 Appearance of the WX5002V2
Front Panel
The WX5002V2 provides two 10/100/1000 Base-T Ethernet electrical interfaces, two 1000 Base-X
Ethernet optical interfaces (Combo ports) and one console port on its front panel, as shown in
Figure
1-2 .