H3C Technologies H3C WX5000 Series Access Controllers - Manual (Page 54)

5-14
Figure 5-5 Send File dialog box
Click Browse… to select the application file to be downloaded, and select Xmodem from the Protocol
drop-down list. Then click Send. The following dialog box appears:
Figure 5-6 Sending file dialog box
Upon successful download, the system displays the following information:
Download successfully!
10323456 bytes downloaded!
Updating Basic BootWare? [Y/N]Y
Updating Basic BootWare.................Done!
Updating Extend BootWare? [Y/N]Y
Updating Extend BootWare...........Done!
Change the baud rate on the configuration terminal from 115200 bps to 9600 bps, and then reboot the
access controller.