H3C Technologies H3C SR8800 - Manual (Page 54)

45
• Perform EF for traffic with the DSCP value EF and set the guaranteed bandwidth to 30 Mbps.
Before performing the configuration, make sure that:
• Router C can reach Router D through Router A and Router B.
• The DSCP fields have been set for the traffic before the traffic enters Router A.
Figure 17 Network diagram
Configuration procedure
Configure Router A
# Define three classes to match the IP packets with the DSCP values AF11, AF21 and EF respectively.
system-view
[RouterA] traffic classifier ef_class
[RouterA-classifier-ef_class] if-match dscp ef
[RouterA-classifier-ef_class] quit
[RouterA] traffic classifier af11_class
[RouterA-classifier-af11_class] if-match dscp af11
[RouterA-classifier-af11_class] quit
[RouterA]traffic classifier af21_class
[RouterA-classifier-af21_class] if-match dscp af21
[RouterA-classifier-af21_class] quit
# Define a default class named be_class to match all IP packets.
[RouterA] acl number 3000
[RouterA] rule 0 permit ip
[RouterA] traffic classifier be_class
[RouterA-classifier-be_class] if-match acl 3000
[RouterA-classifier-be_class] quit
# Define a traffic behavior named ef_behav, configure EF in the behavior, and set the guaranteed
bandwidth to 30720 kbps.
[RouterA] traffic behavior ef_behav
[RouterA-behavior-ef_behav] queue ef bandwidth 30720
[RouterA-behavior-ef_behav] quit
# Define a traffic behavior af11_behav, configure AF in the traffic behavior, and set the guaranteed
bandwidth to 5120 kbps. Configure traffic behavior af21_behav in a similar way.
[RouterA] traffic behavior af11_behav
[RouterA-behavior-af11_behav] queue af bandwidth 5120