Configuring gts for all traffic, Displaying and maintaining gts – H3C Technologies H3C SR8800 User Manual
Page 35
26
Step Command
Remarks
2.
Enter interface view or port
group view.
•
Enter interface view:
interface interface-type
interface-number
•
Enter port group view:
port-group manual port-group-name
Use either command.
Settings in interface view are
effective on the current
interface. Settings in port
group view are effective on all
ports in the port group.
3.
Configure GTS for the
interface or port group.
qos gts queue queue-number cir
committed-information-rate [ cbs
committed-burst-size ]
CBS is the traffic transmitted at
the rate of CIR in 500 ms by
default.
The command is not available
on low-speed CPOS
interfaces.
4.
Display GTS configuration
information.
display qos gts interface [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
Optional.
Available in any view
Configuring GTS for all traffic
To configure GTS for all traffic:
Step
Command
Remarks
1.
Enter system view. system-view N/A
2.
Enter interface
view or port group
view.
•
Enter interface view:
interface interface-type interface-number
•
Enter port group view:
port-group manual port-group-name
Use either command.
Settings in interface view are
effective on the current interface.
Settings in port group view are
effective on all ports in the port
group.
3.
Configure GTS on
the interface or
port group.
qos gts any cir committed-information-rate
[ cbs committed-burst-size ]
For interfaces except low-speed
CPOS interfaces, CBS is the traffic
transmitted at the rate of CIR in
500 ms by default.
For low-speed CPOS interfaces,
CBS is 1024 bytes by default.
4.
Display GTS
configuration
information.
display qos gts interface [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
Optional.
Available in any view
NOTE:
•
Do not configure a CIR exceeding the interface bandwidth. Otherwise, the configuration will fail.
•
Do not configure the qos lr command and the qos gts any command on the same interface or port
group at the same time.
Displaying and maintaining GTS