H3C Technologies H3C SR8800 - Manual (Page 27)

18
Configuration procedure
# Set the ACL rule length limit mode to 3.
system-view
[Sysname] acl mode 3
ACL has been set to mode 3, and will take effect after the next system reboot.
# Display the ACL rule length limit mode.
[Sysname] display acl mode
Current ACL mode : mode 2 (SPE ACL key long, SPC ACL key short)
Acl mode after system restart : mode 3 (SPE ACL key short, SPC ACL key long)
Notice: Changing ACL mode will take effect only after system restart.
# Restart the router.
[Sysname] return
reboot