H3C Technologies H3C SR8800 - Manual (Page 14)

5
Figure 2 Outgoing packet processing procedure
For information about packet-filter firewall configuration, see Security Configuration Guide. For
information about policy-based routing, see Layer 3—IP Routing Configuration Guide. For information
about and QoS policy configuration, see the chapter " Configuring a QoS policy."
ACL configuration task list
Complete the following tasks to configure an ACL:
Task Remarks
Configuring a time range
Optional
Applicable to IPv4 and IPv6 ACLs.
Configuring a basic ACL
Required
Configure at least one task.
Applicable to IPv4 and IPv6 ACLs.
Configuring an advanced ACL
Configuring an Ethernet frame header ACL
Configuring a user-defined ACL
Copying an IPv4 ACL
Optional
Applicable to IPv4 and IPv6 ACLs.
Configuring a flow template
Optional
Applicable to IPv4 and IPv6 ACLs.
Configuring an ACL
Configuring a time range
To configure a time range:
Step Command Remarks
1. Enter system view. system-view N/A
An outgoing packet
arrives
Packet-filter firewall
Find a match?
No
Forward
permit
rule
Drop
deny
rule
QoS policy