100base-x sfp port led, 1000base-x sfp port led – H3C Technologies H3C S3600V2 Series Switches User Manual
Page 58
52
Port status LED
Description
Flashing yellow (3 Hz) POST has failed on the port.
Off
No link is present on the port.
100Base-X SFP port LED
Each 100Base-X SFP port has a status LED to show port operating status and activities. The port mode
LED shows the type of port status information (for example, port rate or duplex mode) that the port status
LEDs are showing. You can use the port status LED mode switching button to change the type of displayed
port information.
Table 23 100Base-X SFP port LED description
Status
Port mode LED
Port status LED
Description
Steady green
The port is operating at 100 Mbps. The port status LED fast
flashes when the port is sending or receiving data.
Flashing yellow (3 Hz) POST has failed on the port.
Steady green (rate
mode)
Off
No link is present on the port.
Steady green
The port is operating in full duplex mode. The port status LED
fast flashes when the port is sending or receiving data.
Flashing yellow (3 Hz) POST has failed on the port.
Steady yellow
(duplex mode)
Off
No link is present on the port.
1000Base-X SFP port LED
Each 1000Base-X SFP port has a status LED to show port operating status and activities. The port mode
LED shows the type of port status information (for example, port rate or duplex mode) that the port status
LEDs are showing. You can use the port status LED mode switching button to change the type of displayed
port information.
Table 24 1000Base-X SFP port LED description
Status
Port mode LED
Port status LED
Description
Steady green
The port is operating at 1000 Mbps. The port status LED fast
flashes when the port is sending or receiving data.
Flashing yellow (3 Hz) POST has failed on the port.
Steady green (rate
mode)
Off
No link is present on the port.
Steady green
The port is operating in full duplex mode. The port status LED
fast flashes when the port is sending or receiving data.
Flashing yellow (3 Hz) POST has failed on the port.
Steady yellow
(duplex mode)
Off
No link is present on the port.