H3C Technologies H3C S3600V2 Series Switches User Manual

Page 33

Item Description

4. Delete file from flash

Delete files from the Flash memory

5. Modify BootRom password

Modify the Boot ROM password

6. Enter BootRom upgrade menu

Enter the Boot ROM upgrade menu

7. Skip current system configuration

Skip the current configuration file (this configuration is
valid once)

8. Set BootRom password recovery

Disable or enable the Boot ROM password recovery
function. By default, Boot ROM recovery is enabled.

You can disable this function to protect system

security.

9. Set switch startup mode

Set the startup mode of the switch

0. Reboot

Restart the switch

•

If you perform no operation or press a key other than Ctrl + B within one second, once the

remaining waiting time becomes zero, the system begins to automatically start up and the following
information is displayed:

Starting to get the main application file--flash:/s3600v2.app!.................

...............................................................................

....

The main application file is self-decompressing................................

...............................................................................

.....................................Done!

System is starting...

Startup configuration file does not exist.

It will take a long time to get configuration file, please wait...

Retrieving configuration file failed!

User interface aux0 is available.

Press ENTER to get started.

If the "Press ENTER to get started" message appears, the automatic startup of the switch is complete.
Press Enter, and the following prompt appears:

This manual is related to the following products: