H3C Technologies H3C S5120 Series Switches - Manual (Page 59)

51
Figure 54 Modify the baud rate
Step3 Select Call > Call to reestablish the connection.
Figure 55 Reestablish the connection
NOTE:
The new settings can take effect only after you reestablish the connection.
6. Establish a connection between the terminal and the switch by using the changed rate
Press Enter to reestablish the connection between the terminal and the switch and download the boot file
at 115200 bps. The following information is displayed:
Now please start transfer file with XMODEM protocol
If you want to exit, Press
Loading ...CCCCCCCCCCCCC
NOTE:
Press Ctrl + X to quit downloading files; otherwise, proceed as follows.
7. Uploading a boot file from the terminal to the switch