H3C Technologies H3C S5120 Series Switches - Manual (Page 56)

48
Task Remarks
Upgrading the Boot ROM file on the switch
Required
Upgrade the Boot ROM file on the switch.
Restoring the download rate to the default
Optional
Set the baud rate of the serial port on the terminal to be
consistent with the default rate of the console port on
the switch.
Restarting the switch to make the upgraded Boot ROM
file effective
Required
1. Enter the Boot ROM update menu on the switch
Enter the Boot ROM menu, and then enter 6 or press Ctrl + U after the system displays “Enter your
choice(0-9):” to enter the Boot ROM update menu.
Enter your choice(0-9): 6
1. Update full BootRom
2. Update extended BootRom
3. Update basic BootRom
0. Return to boot menu
Enter your choice(0-3):
Table 18 Description of the Boot ROM update menu
Item Description
1. Update full BootRom Upgrade the complete Boot ROM file
2. Update extended BootRom Upgrade the extended Boot ROM section
3. Update basic BootRom Upgrade the basic Boot ROM section
0. Return to boot menu Return to the Boot ROM menu
2. Enter the protocol parameter setting menu
After the system displays “Enter your choice(0-3):”, enter 1 to enter the protocol parameter setting menu.
NOTE:
All the Boot ROM files to be loaded are complete Boot ROM files.
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3):
Table 19 Description of the protocol parameter setting menu
Item Description
1. Set TFTP protocol parameter Set TFTP parameters