H3C Technologies H3C S5120 Series Switches - Manual (Page 52)

44
SDRAM fast selftest..........................OK!
Flash fast selftest..........................OK!
CPLD selftest................................OK!
Switch chip selftest.........................OK!
PHY selftest.................................OK!
Please check leds......................FINISHED!
User interface aux0 is available.
Press ENTER to get started.
The appearance of "Press ENTER to get started" indicates that the automatic startup of the switch is
complete.
Press Enter. The following prompt is displayed:
You can configure the switch now.
NOTE:
The H3C series switches provide abundant command views. For more information about the configuration
commands and command line interface (CLI), see
H3C S5120-SI Switch Series Configuration Guide and
H3C S5120-SI Switch Series Command Reference.