beautypg.com

Mounting the switch on a workbench, Figure 30 – H3C Technologies H3C S5120 Series Switches User Manual

Page 33

background image

25

Figure 30 Mount the S5120-28P-PWR-SI to a rack

(1)

(1) Front panel

(2) Rear panel

NOTE:

If support trays are provided on the rack, you can mount the switch to the rack with mounting brackets and
trays. To do so, put the switch on the support tray and slide the switch to an appropriate location, and then
fix the mounting brackets.

Mounting the switch on a workbench

In many cases, standard 19-inch racks are not available. Therefore, switches are often placed on clean

workbenches. To place the switch on a workbench, follow these steps:

See also other documents in the category H3C Technologies Routers: