Changing the boot mode – H3C Technologies H3C S5120 Series Switches User Manual

Page 50

Item Description

4. Delete file from flash

Delete files from the flash memory

5. Modify BootRom password

Modify the Boot ROM password

6. Enter BootRom upgrade menu

Enter the Boot ROM update menu

7. Skip current system configuration

Skip the current configuration file (this configuration is valid once)

8. Set BootRom password recovery

Restore the Boot ROM password

9. Set switch startup mode

Set the startup mode of the switch

0. Reboot

Restart the switch

•

If you perform no operation or press a key other than Ctrl + B within one second, once the

remaining waiting time becomes zero, the system begins to automatically start up and the following
information is displayed:

Starting to get the main application file--flash:/S5120-CMW520-A1101.bin!......

.................................................................

The main application file is self-decompressing................................

...............................................................................

..............................Done!

System is starting...

User interface aux0 is available.

Press ENTER to get started.

The appearance of "Press ENTER to get started" indicates that the automatic startup of the switch is
complete.
Press Enter. The following prompt is displayed:

You can configure the switch now.

Changing the boot mode

By default, the system starts up in fast boot mode. If you want to change the boot mode to normal, press

Ctrl + B within one second to enter the Boot ROM menu showed below:

BOOT MENU

1. Download application file to flash

2. Select application file to boot

3. Display all files in flash