H3C Technologies H3C S5120 Series Switches - Manual (Page 29)

21
Figure 19 Mounting brackets
(2)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(A) (B)
(C) (D)
(1) Screw hole used to fix the mounting bracket to the rack (with an M6 screw)
(2) Screw hole used to fix the switch to the mounting bracket
Attaching the mounting brackets to a switch
CAUTION:
The installation of actual mounting brackets varies with devices.
As shown in Table 14 , the mounting brackets can be attached to a switch for front, center, or rear
mounting. You can choose a proper position according to the actual requirements.
Follow these steps to install a mounting bracket to the chassis:
Step1 Align the mounting holes of the bracket with the holes of the chassis, as shown in Figure 20 .
Step2 Fasten the screws.
Figure 20 Install a mounting bracket on the chassis (A)
(1) Front panel