Airaid 400-214-1 User Manual
Page 2
12. Double check your work!
Make sure there is no foreign material in the
intake path. Make sure all clamps, hoses, bolts,
and screws are tight.
13. Reconnect the negative battery
cables!
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951
REV.10.23.13
P/N 790-551 Aerosol Spray
P/N 790-550 Squeeze Spray
Thank you for purchasing the Airaid Intake System. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST week-
days for questions regarding fit or instructions that are not clear to you. Your Airaid Intake System was carefully inspected and
packaged. Check that no parts are missing, or were damaged during shipping. If any parts are missing, contact Airaid. The air
filter element is protected from direct exposure to water and debris; care should be taken not to drive through deep water. WA-
TER INGESTION IS THE DRIVERS RESPONSIBILITY! The air filter is reusable and should be cleaned periodically.
Weather strip
10. Install the MAF sensor into the Calibration Plate
on the Cool Air Box using two 8-3/8” button head
bolts (#9), as shown. Reconnect the MAF sensor
wiring harness.
Do Not Use The Factory Screws
11. Install the Airaid Premium Filter (#1) onto the
filter adapter, and tighten the hose clamp. Next in-
stall the Top Panel (#3) onto the top of the Cool Air
Box using six 8-32x3/8” button head bolts (#9), and
#8 flat washers (#10). Install the weather strip (#5)
onto the edge of the top panel as shown
Factory Tube
MAF Sensor
Top Panel
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number,
and click View Details.
FILTER IDENTIFICATION
720-472 Airaid Oiled Media 721-472 Airaid SynthaMax Dry Media - Red
722-472 Airaid SynthaMax Dry Media - Black 723-472 Airaid SynthaMax Dry Media - Blue
For your Oiled media filter we
suggest using the AIRAID Filter
Tune-Up Kit!
Synthamax Air Filters do not re-
quire oil. Service air filter as need-
ed by cleaning with common non-
petroleum all-purpose household
cleaner and water. Simple Green®,
Formula 409® or equivalent works
great. Apply cleaner to outside of
air filter and allow to soak. Then
flush filter clean from the inside out
with a garden hose and repeat steps
if necessary. Do not apply high
pressure water or air to clean filter.
Allow filter to air dry and reinstall.