Filter identification – Airaid 400-115 User Manual
Page 2
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951
P/N 790-551 Aerosol Spray
P/N 790-550 Squeeze Spray
Thank you for purchasing the Airaid Intake System. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST weekdays for questions
regarding fit or instructions that are not clear to you. Your Airaid Intake System was carefully inspected and packaged. Check that no parts are
missing, or were damaged during shipping. If any parts are missing, contact
Airaid
. The air filter element is protected from direct exposure to wa-
ter and debris; care should be taken not to drive through deep water. WATER INGESTION IS THE DRIVERS RESPONSIBILITY! The air filter
is reusable and should be cleaned periodically.
REV.10.21.13
FILTER IDENTIFICATION
700-420 Airaid Oiled Media 701-420 Airaid SynthaMax Dry Media - Red
702-420 Airaid SynthaMax Dry Media - Black 703-420 Airaid SynthaMax Dry Media - Blue
Synthamax Air Filters do not require oil. Ser-
vice air filter as needed by cleaning with com-
mon non-petroleum all-purpose household
cleaner and water. Simple Green®, Formula
409® or equivalent works great. Apply cleaner
to outside of air filter and allow to soak. Then
flush filter clean from the inside out with a gar-
den hose and repeat steps if necessary. Do not
apply high pressure water or air to clean filter.
Allow filter to air dry and reinstall.
For your Oiled media filter we
suggest using the AIRAID Filter
Tune-Up Kit!