Airaid 350-160 - Manual

Installation Instructions
For Part Numbers:
350-160
700-458 Airaid Oiled Media Filter
351-160 701-458 SynthaMax Dry Media Filter - Red
352-160 702-458 SynthaMax Dry Media Filter - Black
353-160 703-458 SynthaMax Dry Media Filter - Blue
2005-08 Dodge Magnum R/T 5.7L V8
2005-08 Chrysler 300C 5.7L V8
2006-08 Dodge Charger R/T 5.7L V8
2. Disconnect the breather hose from the fac-
tory air box lid.
3. Remove the factory air box lid and flat panel
filter. (Note: Retain the factory air box
base.)
4. Install the supplied ½” hose on the Airaid
CAD nipple. Assemble Airaid CAD
panels using supplied hardware. Install
supplied ½” nylon union through the panel
hole into the ½” hose.
5. Install the Airaid CAD in place of the fac-
tory air box lid. Tighten factory hose
clamp.
6. Connect the factory breather hose to nylon
½” union.
8. Double check your work to be
certain that all nuts, bolts, and
clamps are securely fastened.
7. Install Airaid filter on the end of the intake
tube. Install weather strip on CAD. (Note:
Start from one end of air box and work
your way to the other end.)
Component Identification
1. Airaid Premium Filter 1
2. MAF Air Dam Panel 1
3. Air Dam Panel 1
4. Weather Strip 25 ½” 1
5. ½” x 3 ½” Hose 1
6. ½” to ½” Connector 1
7. #6 Phillips Screw 4
8. #6 Nut 4
9. #6 Flat Washer 4
1. Loosen the hose clamp on the intake tube.
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.