Airaid 310-164 - Manual

Installation Instructions
For Part Numbers:
310-164 700-456 Airaid Oiled Media Filter
311-164 701-456 SynthaMax Dry Media Filter - Red
312-164 702-456 SynthaMax Dry Media Filter - Black
313-164 703-456 SynthaMax Dry Media Filter - Blue
1997-2002 Jeep Wrangler (TJ)
2.5L I4
1. Disconnect the negative battery cable.
Loosen the hose clamp that holds the factory
intake tube to the resonator. 2. Unlatch the clips on the factory air cleaner
lid, next remove the lid, and tube as an assem-
bly. 3. Loosen the clamp that holds the resonator to
the throttle body.
4. Disconnect the breather hose from the reso-
nator. 5. Remove the bolt that holds the resonator to
the valve cover. 6. Remove the resonator from the vehicle.
7. Remove three bolts from inside the lower air
cleaner box and remove it from the vehicle. 8. A.) On the right fender, pry two tabs away
from the fuse box, lift it up and set it off to the
side. B.) Next, remove and save the outside bolt
from the fuse box mount. It will be re-used in
step #14.
9. Remove one bolt from the passenger side
radiator fan shroud and save it for step #15.
Component Identification
1. Airaid Premium Filter 1
2. MAF Panel 1
3. Bottom Panel 1
4. Airaid Intake Tube 1
5. Hump Hose 1
6. Reducer 1
7. Weather Strip 27” 1
8. 6-32x5/16” Screw 4
9. #6 Flat Washer 4
10. 6-32 Keps Nut 4
11. ¼”X20x1/2” Button Head Bolt 2
12. ¼” Flat Washer 3
13. 1/4” Fender Washer 1
14. 1/4-20 Nylock Nut 1
15. M6x12mm Hex Bolt 1
16. #44 Hose Clamp 2
17. #72 Hose Clamp 2
18. L-Bracket 1
19. Grommet 1
10. Remove and save the bolt from the pas-
senger side radiator support brace. It will be re
-used in step #13. 11. Assemble the two Cool Air Dam panels (#2)
& (#3) using the four 6-32 screws (#8), #6 flat
washers (#9), and nuts (#10), as shown. 12. Slide the rubber grommet (#19) over the
radiator support, followed by the assembled
CAD. Use caution not to scratch the paint
on the support rod.
A.
B.
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.