Filter identification – Airaid 310-148 User Manual
Page 2
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951
P/N 790-551 Aerosol Spray
P/N 790-550 Squeeze Spray
Thank you for purchasing the Airaid Intake System. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST week-
days for questions regarding fit or instructions that are not clear to you. Your Airaid Intake System was carefully inspected and
packaged. Check that no parts are missing, or were damaged during shipping. If any parts are missing, contact Airaid. The air
filter element is protected from direct exposure to water and debris; care should be taken not to drive through deep water. WA-
TER INGESTION IS THE DRIVERS RESPONSIBILITY! The air filter is reusable and should be cleaned periodically.
10. Connect the factory breather hose to the Modu-
lar Intake Tube & secure hose with the #16 black
speed clamp provided.
11. Mount the Airaid Premium filter & weather strip
onto the Cool Air Dam. (Hint: start the weather
strip at a corner and work towards the ends).
REV.11.6.13
FILTER IDENTIFICATION
720-440 Airaid Oiled Media 721-440 Airaid SynthaMax Dry Media - Red
722-440 Airaid SynthaMax Dry Media Filter - Black 723-440 Airaid SynthaMax Dry Media - Blue
Synthamax Air Filters do not require
oil. Service air filter as needed by
cleaning
with
common
non-
petroleum all-purpose household
cleaner and water. Simple Green®,
Formula 409® or equivalent works
great. Apply cleaner to outside of air
filter and allow to soak. Then flush
filter clean from the inside out with a
garden hose and repeat steps if nec-
essary. Do not apply high pressure
water or air to clean filter. Allow fil-
ter to air dry and reinstall.
For your Oiled media filter we
suggest using the AIRAID Filter
Tune-Up Kit!
12. Double check your work to be certain that all
nuts, bolts, and clamps are securely fastened.
13. Reconnect the negative battery cable.